Acre-feet converter

Reservoir storage is reported in acre-feet. Turn it into gallons, cubic feet or cubic meters — or the other way round.

Shasta Dam holding back Shasta Lake, California’s largest reservoir, with Mount Shasta behind at sunrise
Photo: JonMallard10, CC BY 4.0

Enter a number

The formula

1 acre-foot = 43,560 ft³ = 325,851 gallons = 1,233.48 m³. An acre is 43,560 square feet; cover it one foot deep and you have an acre-foot.

  • Gallons = acre-feet × 325,851
  • Cubic meters = acre-feet × 1,233.48
  • Acre-feet = gallons ÷ 325,851

Reservoirs in acre-feet

Texas and California publish every major reservoir’s storage in acre-feet. Lake Travis holds about 1.1 million acre-feet at full pool; Shasta Lake, California’s largest reservoir, 4.55 million; Lake Mead, the largest in the country, about 26 million. See today’s storage on Texas lake levels and California lake levels.

Questions

How many gallons are in an acre-foot?

One acre-foot is 325,851 U.S. gallons: one acre (43,560 square feet) covered one foot deep, which is 43,560 cubic feet.

How much water is an acre-foot in real life?

Roughly what two to three typical U.S. households use in a year, or a football field (without the end zones) covered about 9 inches deep.

How do I convert acre-feet to cubic meters?

Multiply by 1,233.48. One acre-foot is 1,233.48 m³, or 1.233 megaliters.

Why do reservoirs use acre-feet?

Because U.S. water rights, irrigation and reservoir storage were set up in acres and feet. Lake Mead holds about 26 million acre-feet when full; Lake Travis about 1.1 million.